Walnut Wood Veneer EdgeBanding

Walnut Edge Banding

In stock, ready to ship
Width
Finish
Backing
Finish
Non Finished
Material
Wood Veneer
Regular price$54.55
/
Shipping calculated at checkout.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Walnut Edge Banding

Walnut edge banding is a premium product made from real walnut wood veneer, it offers a natural, seamless edge for furniture, cabinetry, and woodworking projects. Characterized by its rich, light grayish brown to chocolate brown color,

Available Sizes & Specifications

About wood veneer edge banding

Wood veneer edge banding is a thin strip of real sliced hardwood applied to the exposed edges of plywood, MDF, or particleboard panels. It seals and protects the raw edge and gives the panel a finished, solid-wood look. Unlike printed PVC edge banding, it is real wood, so it matches the grain and color of wood veneer sheets and panels and accepts the same finishes.

Available sizes and specifications

Width options

5/8", 3/4", 13/16", 7/8", 15/16", 1", 1.1/8", 1.1/4", 1.5/16", 1.3/8", 1.1/2", 1.5/8", 1.3/4", 2", 2.1/8", 2.1/4", 2.3/8", 2.1/2", 2.5/8", 2.3/4", 2.7/8", 3", 3.1/8", 3.1/4", 3.3/8", 3.1/2", 3.5/8", 3.3/4", 3.7/8", 4", 7"

Thickness options

  • Standard: 0.5mm (0.020"). Suits most applications.
  • Thick: 1mm, 1.5mm, and 2mm. Call (754) 367-6838 to order.

Every width is available in your choice of backing.

Backing options

  • Pre-glued (iron-on). Heat-activated glue is already applied. Bond it with a standard household iron on medium heat for fast, clean adhesion. Suitable for professionals and DIYers.
  • Peel-and-stick (3M PSA). A pressure-sensitive adhesive backing. Peel the liner and press the band onto the edge. No heat or tools required.
  • Fleece-backed (raw). The veneer is bonded to a non-woven fabric backing that lets it flex without splitting. Apply it with contact cement, or feed it through an edge banding machine using an EVA or PUR edge banding glue pot. Suited for curves and high-volume production.

Wood Finishes

LEDGEBAND wood veneer edge banding comes in two finish states: unfinished/sanded, and pre-finished.

Unfinished and sanded. The raw veneer surface is sanded and ready to finish. It accepts the same coatings as the panel:

  • Stains (water-based and oil-based)
  • Dyes and toners
  • Clear topcoats (lacquer, polyurethane, conversion varnish)
  • Paint (over a proper primer)

Finish the band and the panel together for a uniform result.

Pre-finished. The veneer edge banding comes with a factory applied finished topcoats.

  • Unfinished and sanded — Raw, sanded veneer. Finishing required: stain, seal, or paint on site. Best for matching a custom finish.
  • Pre-finished — Factory topcoat. No finishing required. Best for ready-to-install jobs and production runs.

See how to apply veneer edge banding.

Common applications

Cabinet and closet construction, bookcase and shelving edges, furniture, and plywood panel finishing. A practical choice for cabinet shops and DIYers refacing or building with real-wood panels.

Where to buy wood veneer edge banding

LEDGEBAND supplies wood veneer edge banding, PVC edge banding laminate sheets and hot melt adhesives to cabinet makers, contractors, and DIYers nationwide. No minimums, fast lead times.

Complete your project

Paintable edge banding

PVC Edge Banding

View all →
Wilsonart  Oxide 1787 Edge Banding
Wilsonat
Wilsonart Oxide 1787 Edge Banding
from $85.00

Recently viewed